- Changzhou Huanshi Hydraulic Equipment Co., Ltd.
- Daikin Pump Denison Pump NACHI Pump
English
Home>Products>Thrust Tapered Roller Bearings>K16288 Timken Tapered Roller Bearings
K16288 Timken Tapered Roller Bearings
category
Thrust Tapered Roller Bearings
Timken K16288 Bearing SPECIFICATIONS
With over 10170 full-service Changzhou Huanshi Hydraulic Equipment Co., Ltd. 18 mm B stores, our K16288 Timken Tapered Roller Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. 0.8 Calculation factor Y0
- Timken
K16288
- 18 mm
- 0.8
- 3.6 mm
- 67 mm
- 46 mm
- 15.786 mm
- 4 mm
- 71 mm
Changzhou Huanshi Hydraulic Equipment Co., Ltd.
Changzhou Huanshi Hydraulic Equipment Co., Ltd.China
-
Changzhou Huanshi Hydraulic Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
K16288 Timken Tapered Roller Bearings Systems
- 18 mm
- 0.8
- 3.6 mm
- 67 mm
- 46 mm
- 15.786 mm
- 4 mm
- 71 mm
- 53 mm
- 1.5
- 8500 r/min
- 7000 r/min
- 0.4
- 1.6 mm
- 1.6 mm
- 3.6 mm
- 75 mm
- LM 503300
- 58.5 mm
- 71 kN
Timken K16288 The details of Thrust Tapered Roller Bearings
| No. | Brand | D | H | T | B | d | b | K | R |
| K172114 | Timken | - | - | - | - | - | - | - | - |
| NA643/632D | Timken | - | - | - | 20 mm | 30 mm | - | - | - |
| 7079/07196D | Timken | 7.56 Inch | 192.024 Millimeter | - | - | - | 5.906 Inch | 150 Millimeter | - | - | - |
| K162042 | Timken | 65.088 mm | - | 19.812 mm | - | 38.1 mm | - | - | - |
| K516778R | Timken | - | - | - | - | - | - | - | - |
| NA98350/98789D | Timken | - | - | - | - | 25 mm | - | - | - |
| NA05075/05185D | Timken | 140.0000 mm | - | - | 33.00 mm | 65.000 mm | - | - | - |
| K527327R | Timken | - | - | - | - | - | - | - | - |
| NA71450/71751D | Timken | 950 mm | - | - | 375 mm | 710 mm | - | - | - |
| M271110CD | Timken | - | - | - | 48.666 mm | 360 mm | - | - | - |
| K518779R | Timken | - | - | - | 25 mm | 35 mm | - | - | - |
| K161769W | Timken | - | - | - | 35 mm | 50 mm | - | - | - |
| NP281709 | Timken | 80 mm | - | - | 23 mm | - | - | - | - |
| NP682333 | Timken | - | 169.863 mm | - | - | - | - | - | - |
| NA43131/43319D | Timken | 190 mm | - | 88 mm | - | 105 mm | 5 mm | 2 mm | - |
| NP666081 | Timken | 72.0000 mm | - | - | - | 35.000 mm | - | - | - |
| K444653R | Timken | - | 422.275 mm | - | - | - | - | - | - |
| NA593/592D | Timken | - | - | - | 20 mm | - | 10 mm | - | - |
| K159547H | Timken | - | 144.463 mm | - | 85.725 mm | - | - | - | - |
| K167951 | Timken | - | - | - | - | - | - | - | - |
| 526191D | Timken | 520 mm | - | - | 150 mm | - | 11.6 mm | 6 mm | - |
| 640261CD | Timken | - | - | - | - | - | - | - | - |
| 425299D | Timken | 420 mm | 122 mm | - | 41 mm | 220 mm | - | - | - |
| NA749/742D | Timken | 520 mm | 112 mm | - | 33.5 mm | 380 mm | - | - | - |
| K161690W | Timken | 90.0000 mm | - | - | 46.00 mm | 30.000 mm | - | - | - |
| 672875D Timken Tapered Roller Bearings | H1:57.15 mm; L:225.425 mm; A:63.5 mm; Attachment bolt diameter G:15.875 mm; B:73.025 mm; Mass bearing unit:4.76 kg; J min.:174.625 mm; H2:33.337 mm; d2:73.819 mm; Basic dynamic load rating C:84.5 kN; S:0.794 mm; Limiting speed:4100 r/min; s:25.4 mm; H:114.3 mm; A1:80.169 mm; J max.:180.975 mm; da:49.212 mm; |
| NA476/472D Timken Tapered Roller Bearings | B:132 mm; with tapered bore:1 000 min-1; rs (min):5 mm; Oil:238.900 kN; Static (Cor):22.3 mm; Pu:1920 kN; Dynamic (Cr):12 mm; D:400 mm; d:190 mm; Grease:2710 kN; with cylindrical bore:840 min-1; |
| NP835117 Timken Tapered Roller Bearings | Dynamic (Cr):4.5 mm; with tapered bore:3 000 min-1; D:160 mm; d:75 mm; B:55 mm; rs (min):2.1 mm; Grease:489 kN; Static (Cor):8.3 mm; with cylindrical bore:2 300 min-1; Pu:396 kN; Oil:56.460 kN; |
| 931251XD Timken Tapered Roller Bearings | d:60.000 mm; Basic Static Radial Load Rating Co:95000 N; D:130.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Grease Speed Rating n1:3400 rpm; B:57.20 mm; Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:121000 N; Accessories:One Shield & Snap-Ri; |
| K172122 Timken Tapered Roller Bearings | Tolerance shaft:e7; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; d:5 mm; Mass bushing:0.003 kg; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; B:8 mm; D:10 mm; |
| NA48686/48620D Timken Tapered Roller Bearings | L:511.175 mm; J1:85.725 mm; Mass pillow block:63.9 kg; da:152.4 mm; h:43.656 mm; Taconite seal:TER 141; P180°:103 kN; P60°:249 kN; Appropriate attachment bolt size G:1 in; Cap bolt recommended tightening torque:400 N·m; ba:64.294 mm; A1:149.225 mm; Da:259.999 mm; PG:1/4 NPT; Eye bolt:3/8-16 UNC; J max.:441.325 mm; P120°:94.3 kN; J min.:396.875 mm; End plug (suffix Y):EPR 18; H:305.594 mm; |
| NA329115/329173CD Timken Tapered Roller Bearings | Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:48800 N; D:85.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:6700 rpm; d:45.000 mm; Accessories:One Seal; B:30.20 mm; Basic Static Radial Load Rating Co:39000 N; Sealed Speed Rating n3:5000 rpm; |
| 7100SA/07196D Timken Tapered Roller Bearings | b:7.7 mm; Lubricant:Maintenance free &nd; Da min.:104.4 mm; M:4 mm; r2 min.:1 mm; Material constant KM:330; rb max.:1 mm; ra max.:0.6 mm; b1:7.7 mm; Specific dynamic load factor K:150 N/mm²; Basic dynamic load rating C:600 kN; Design (sliding contact surface combination):Steel/steel; Da max.:113.8 mm; Specific static load factor K0:500 N/mm²; B:74 mm; Mass plain bearing:2.5 kg; Basic static load rating C0:2000 kN; |
| M260110D Timken Tapered Roller Bearings | Attainable speed for grease lubrication:17000 r/min; d:55 mm; rb max.:0.3 mm; r3,4 min.:0.3 mm; Preload class D GD:960 N; db max.:62.1 mm; Calculation factor f2B:1.07; Preload class A GA:120 N; Fatigue load limit Pu:0.585 kN; Calculation factor (single, tandem) Y2:0.87; a:22.4 mm; Basic static load rating C0:13.7 kN; Calculation factor (back-to-back, face-to-face) Y2:1.41; Static axial stiffness, preload class C:234 N/µm; |
| 133181D Timken Tapered Roller Bearings | C1 max.:18 mm; G:M 24x2; Material constant KM:330; B:20 mm; Specific dynamic load factor K:100 N/mm²; α:7 °; h1:94 mm; l3 min.:36 mm; Basic static load rating C0:90 kN; d4 ≈:35 mm; d:25 mm; l5 ≈:18 mm; Basic dynamic load rating C:48 kN; w:30 mm; dk:35.5 mm; Mass rod end:0.65 kg; l7 min.:30 mm; l4 max.:128 mm; d2 max.:65 mm; r1 min.:0.6 mm; |
K16288 Timken Tapered Roller Bearings Video
Timken K16288 INTERCHANGE
Thrust Tapered Roller Bearings Part series K16288 is a potential replacement for these common bearing part numbers:
K16288
K16288
K16288
K16288
K16288
K16288
K16288
K16288
Contact Us
- Changzhou Huanshi Hydraulic Equipment Co., Ltd.
- Address5954 South International Drive, Golumbus, IN 29416,U.S.A.
- Phone(Working Time)+1-295-194-2967
- Fax
Thrust Tapered Roller Bearings CATEGORIES
- Daikin Pump
- Denison Pump
- NACHI Pump
- Parker Pump
- Rexroth Pump
- Vickers Pump
- Yuken Pump
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Crossed Roller Bearing
- Spherical Roller Bearings
- Cam Follower And Track Roller
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
NA691/672D Timken Tapered Roller Bearings
NA52375/52637D Timken Tapered Roller Bearings
43112/43319D Timken Tapered Roller Bearings
2872/02823D Timken Tapered Roller Bearings
15112/15251D Timken Tapered Roller Bearings